Featured
1085039
PHX1085039
Official DistributorIndustrial Ethernet Switch - FL SWITCH 1005N
Narrow Ethernet switch, five RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS
- RJ45 ports support a transmission speed of 10/100 Mbps
- QoS-prioritized (Quality of Service) messages
- Local diagnostic indicators with LEDs
- Enhanced traffic prioritization for automation protocols
- PROFINET PTCP filter for reliable communication on PROFINET networks
- Energy-efficient Ethernet in accord. with IEEE 802.3az
- PROFINET Conformance Class A for real-time data exchange
- Auto negotiation and autocrossing detection simplifies installation and setup
Technical Specifications
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
Dimensions
| Width | 22.5 mm |
| Height | 117 mm |
| Depth | 84 mm |
Ambient conditions
| Degree of Protection | IP30 |
| Ambient Temperature (Operation) | -10 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Air pressure (operation) | 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) |
| Air pressure (storage/transport) | 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) |
Interfaces
| Interface | Ethernet (RJ45) |
| No. of ports | 5 (RJ45 ports) |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Transmission Speed | 10/100 Mbps |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Data receive, link status |
Function
| Basic Functions | Unmanaged switch |
| Basic Functions | Autonegotiation |
| Basic Functions | Store and Forward switching mode |
| Additional functions | 100 BASE-TX/100BASE-FX (IEEE 802.3u) |
| Additional functions | Quality of Service (QoS) prioritization (IEEE 802.1p) |
| Additional functions | Energy-efficient Ethernet (IEEE 802.3az) |
| Additional functions | 10Base-T (IEEE 802.3) |
| MAC address table | 2k |
| PROFINET conformance class | Conformance-Class A |
| Status and diagnostic indicators | LEDs: US, link and activity per port |
Network expansion parameters
| Cascading depth | Network, linear, and star structure: any |
| Maximum conductor length (twisted pair) | 100 m |
Supply voltage
| Supply Voltage | 24 V DC |
| Supply Voltage | 24 V AC (50/60 Hz) |
| Residual ripple | 3.6 VPP (within the permitted voltage range) |
| Supply Voltage Range | 9 V DC ... 32 V DC |
| Supply Voltage Range | 18 V AC ... 30 V AC (50/60 Hz) |
| Typical current consumption | 19 mA (at 24 V DC) |
| Max. current consumption | 110 mA (at 9 V DC) |
General
| Mounting Type | DIN rail |
| Net weight | 161.3 g |
| Housing Material | Polycarbonate fiber reinforced |
| MTTF | 167.2 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
| MTTF | 1627 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 1526 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
Connection data
| Connection Method | Push-in spring connection |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 12 |
| Stripping length | 10 mm |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Interference emission | EN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Criterion A |
| Conducted noise emission | EN 61000-6-2 Class A |
| Immunity to surge | EN 61000-6-2 EN 61000-4-5 (surge) Criterion B |
| Immunity to burst | EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A |
| Immunity to EF | EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A |
| Immunity to ESD | EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B |
| Immunity to conducted interference | EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A |
| Type of test | Free fall in accordance with EN 61131-2 |
| Noise emission | EN 61000-6-4:2007 + A1:2011 |
| Noise immunity | EN 61000-6-2:2005 |
| Vibration (storage/transport) | 5g, 150 Hz, in acc. with IEC 60068-2-6 |
| Free from substances that could impair the application of coating | In acc. with VW specification |
| Vibration (Operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Shock (operation) | 30g (EN 60068-2-27) |
| UL, USA / Canada | UL 61010-1, UL 61010-2-201, UL 62368-1 Class I, Div. 2, Groups A, B, C, D, T4 Class I, Zone 2, Group IIC, T4 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
Accessories
Why Proax for Phoenix Contact 1085039?
Proax is an authorized distributor of Phoenix Contact 1085039 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Recommended
Sysmac NX1P CPU with 24 Digital Transistor I/O (PNP), 1.5 MB memory, EtherCAT (0 servo axes, 4 PTP axes, 16 EtherCAT nodes), EtherNet/IP and 1 serial option port
