2024 Promotions du printemps

Spécial trimestriel valable du 1er avril au 30 juin, 2023

OFFRES ET PROMOTIONS DE PHOENIX CONTACT

Amplificateur-séparateur

Commutateurs non gérés

Connecteurs M12 avec connexion Push-Lock

Boîtes d'épissures et Câble de jonction FO

Alimentations

Goulotte et Coupe-goulotte

Rail DIN avec coupe-rail DIN

Amplificateur-séparateur

MINI Analogue Pro

Isolation, conditionnement, filtrage et amplification sûrs pour le traitement des signaux analogiques

Configurable à l'aide d'un logiciel ou de commutateurs DIP, ou les deux

Compatible avec de nombreuses entrées de combinaison de signaux analogiques

Intégrer les signaux de terrain dans les réseaux industriels tout en bénéficiant

d'une isolation électrique sûre

2902040

MINI MCR-2-UI-UI-PT - 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, standard configuration.

2902037

MINI MCR-2-UI-UI - 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, standard configuration.

2905028

MINI MCR-2-UNI-UI-2UI-PT - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.

2905026

MINI MCR-2-UNI-UI-2UI - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.

Commutateurs non gérés

Séries FL 1000 et 1100

Encombrement minimal grâce à une conception très compacte

Versions Gigabit avec trames jumbo pour un débit de données élevé

Homologations multiples, y compris maritime et dangereuse

Plage de température de : -40°C à 75°C

Corps métallique (base et verrou DIN)

Gamme d'entrée AC ou DC ; entrée 9-32VDC ou 18-30VAC

1085170

FL SWITCH 1005NT - Narrow Ethernet switch, wide temperature range five RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

1085165

FL SWITCH 1008NT - Narrow Ethernet switch, wide temperature range, eight RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

1343027

FL SWITCH 1024T - Ethernet switch, twenty-four RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

1085163

FL SWITCH 1105NT - Narrow Ethernet switch, wide temperature range, five RJ45 ports with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

1085162

FL SWITCH 1108NT - Narrow Ethernet switch, wide temperature range, eight RJ45 ports with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

1085115

FL SWITCH 1116T - Ethernet switch, sixteen RJ45 ports with 10/100/1000 Mbps on all ports, wide temperature range, automatic data transmission speed detection, autocrossing function, and QoS

Connecteurs M12 avec connexion Push-Lock

Sans outil grâce à l'emboîtement direct

Connexion sans outil de conducteurs rigides et flexibles avec et sans embouts

Connexion intuitive des conducteurs avec codage couleur et numérique des leviers de contact

Forces d'arrachement élevées du conducteur grâce à la technologie éprouvée de la cage à ressort

4-,5-pos. // A-, B-, D-, S-, T-, K-, L-coded

Blindé, non blindé - IP65, IP67

Mâle, femelle // droit, coudé

1424649

SACC-M12MS-5PL M - Connector, Universal, 5-position, unshielded, Plug straight M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424651

SACC-M12MR-5PL M - Connector, Universal, 5-position, unshielded, Plug angled M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424652

SACC-M12FS-5PL M - Connector, Universal, 5-position, unshielded, Socket straight M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424653

SACC-M12FR-5PL M - Connector, Universal, 5-position, unshielded, Socket angled M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424654

SACC-M12MR-4PL M - Connector, Universal, 4-position, unshielded, Plug angled M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424655

SACC-M12FS-4PL M - Connector, Universal, 4-position, unshielded, Socket straight M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424656

SACC-M12FR-4PL M - Connector, Universal, 4-position, unshielded, Socket angled M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424657

SACC-M12MS-4PL M - Connector, Universal, 4-position, unshielded, Plug straight M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424658

SACC-M12MS-5PL SH - Connector, Universal, 5-position, shielded, Plug straight M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

1424659

SACC-M12MR-5PL SH - Connector, Universal, 5-position, shielded, Plug angled M12, coding: A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

FDX20 Boîtes d'épissures et Câble de jonction FO

Transmission de données à grande vitesse et à l'épreuve du temps

Montage compact sur rail DIN

Jusqu'à 12 connexions LC duplex pour plus d'espace dans les armoires de commande

Réduire le temps d'installation grâce à la conception pré-assemblée pour l'épissage par fusion

Plage de température de fonctionnement de -25°C à 70°C

La fibre OM4 supporte 10GBase-SX jusqu'à une longueur de 550m

La fibre OM4 supporte 1000Base-SX jusqu'à 1040m, 1000Base-LX jusqu'à 600m

1019712

FOC-FDX20-PP-LCD6-OM4-PT9 - Splice box, design: Rail-mountable module, degree of protection: IP20, material: Metal, connection method: Splicing, cable outlet: above and below, housing size: 1, color: gray, Ethernet

1019708

FOC-FDX20-PP-LCQ6-OM4-PT9 - Splice box, design: Rail-mountable module, degree of protection: IP20, material: Metal, connection method: Splicing, cable outlet: above and below, housing size: 1, color: gray, Ethernet

1115625

FOC-LC:PA-LC:PA-OM4:D01/1 - Multi-mode OM4 duplex jumper, LC-LC, UPC polishing, length 1 m

Alimentations

PUISSANCE TRIO — TRIO3

Augmentation dynamique jusqu'à 150 % pendant 5 secondes

Alimentation et protection dans un seul appareil grâce à la protection multicanal intégrée de l'appareil avec IO-LINK

Contact pour message de groupe et LED multicolore

Installation facile grâce au raccordement Push-In et à une profondeur d'installation minimale de seulement 125 mm

Large gamme de températures : -25°C ... 70°C, type de démarrage testé : -40°C

Agrément Classe 1 Div 2

1159037

TRIO3-PS/1AC/24DC/5 - Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC

1159038

TRIO3-PS/1AC/24DC/10 - Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC

1159039

TRIO3-PS/1AC/24DC/20 - Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC

1159042

TRIO3-PS/3AC/24DC/10 - Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC

1159044

TRIO3-PS/3AC/24DC/20 - Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC

1159045

TRIO3-PS/3AC/24DC/40 - Primary-switched power supply unit, TRIO POWER, Push-in connection, DIN rail mounting, input: 3-phase, output: 24 V DC / 40 A, adjustable from 24 V DC ... 28 V DC

1252696

TRIO3-PS/1AC/24DC/10/4C/IOL - Primary-switched power supply unit, TRIO POWER, Push-in connection, 4-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC

1252697

TRIO3-PS/1AC/24DC/20/8C/IOL - Primary-switched power supply unit, TRIO POWER, Push-in connection, 8-channel electronic circuit breaker, IO-Link, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC

Goulotte et Coupe-goulotte

Accessoires de montage pour armoires de commande

Le couvercle s’enclenche facilement

Numéro de pièce unique pour la goulotte et le couvercle

Deux (2) mètres de long, correspondant au rail DIN 2m de Phoenix Contact

Longueur 2m, correspond au produit rail DIN 2m de Phoenix Contact

Deux lignes de démarcation pour faciliter le retrait des doigts et du mur, sans bords tranchants.

3240188

CD 25X40 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 25 mm, height: 40 mm, length: 2000 mm

3240191

CD 25X60 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 25 mm, height: 60 mm, length: 2000 mm

3240197

CD 25X80 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 25 mm, height: 80 mm, length: 2000 mm

3240283

CD 30X100 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 30 mm, height: 100 mm, length: 2000 mm

3240189

CD 40X40 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 40 mm, height: 40 mm, length: 2000 mm

3240192

CD 40X60 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 40 mm, height: 60 mm, length: 2000 mm

3240198

CD 40X80 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 40 mm, height: 80 mm, length: 2000 mm

3240294

CD 40X100 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 40 mm, height: 100 mm, length: 2000 mm

3240199

CD 60X80 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 60 mm, height: 80 mm, length: 2000 mm

3240263

CD 60X100 - Cable duct for installation and mounting in control cabinets, gray, comprising upper part and mounting base, width: 60 mm, height: 100 mm, length: 2000 mm

1207569

PPS CD M - Cable duct cutter, for burr-free cutting cable ducts and their covers, can be used up to a width of 125 mm

1212474

CUTFOX-CD - Cable duct cutter, for cutting plastic cable ducts, covers, and profiles, 45° limit stop also for bevel cuts, 75 mm cutting length

Rail DIN avec coupe-rail DIN

La gamme de rails DIN comprend diverses dimensions standard de rails DIN telles que les versions NS 35/7,5, NS 35/15 et NS 15. Elle comprend également des rails DIN galvanisés et non revêtus. Des rails DIN perforés et non perforés sont également disponibles. Outre ces rails DIN, la gamme comprend également des rails DIN de type G.

0801733

NS 35/ 7,5 PERF 2000MM - DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver

1207585

PPS BASIC I/M - Profile cutter, for cutting standard DIN rails to length, NS 15 / NS 35/7,5 / NS 35/15, and for cutting the NLS‑CU 3/10 neutral busbar to length, with inch/metric measuring rail

AVEZ VOUS BESOIN D'AIDE?

Notre équipe peut vous aider avec des preuves de concepts, des démonstrations sur site et pour trouver le produit dont vous avez besoin.